Drainage Composites

Home » Products & Services » Stormwater Management » Drainage Composites

Composites

Explore our selection of dimple core drainage composites for residential and commercial waterproofing, athletic field drainage and highway edge drain.

CCM Drain 150

Economical drainage composite

Features

Lightweight

Light duty polypropylene dimpled core and nonwoven geotextile fabric

Effective waterproofing for light commercial and residential applications

Applications

Basement foundations

Retaining walls

Planters

Roof gardens

CCM Drain 150 protects waterproofing systems and manages sub-surface water around building foundations. The product consists of a light duty impermeable dimpled drainage core. The core is bonded with a layer of nonwoven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Collected water is then conveyed to a proper collection system. CCM Drain 150 is best suited for light commercial and residential applications.

Size
48″ x 50′

CCM Drain 150 Specification

JDRAIN 400

Moderate duty drainage composite

Features

High flow impermeable drainage core

Nonwoven geotextile fabric

Higher compressive strength and flow rate compared to CCM150

Applications

Foundations

Retaining walls

Planters

Under slabs

Bridge abutments

JDrain 400 protects waterproofing systems and manages sub-surface water around building foundations. The product consists of a high flow impermeable dimpled drainage core. The core is bonded with a layer of nonwoven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Collected water is then conveyed to a proper collection system. JDrain 400 maintains a very high flow rate while providing a higher compressive strength at greater depths. It is recommended for moderate duty applications.

Size
48″ x 50′

JDrain 400 Specification

ESD II with Nonwoven Geotextile Fabric

Dual sided strip drain

Features

Multi-directional flow for continuous discharge

Lightweight and easy to install

3-5x the drainage flow capacities of traditional aggregate systems

Fabric meets AASHTO M288-06 spec for survivability

Applications

Trench drains

Interceptor drains

Highway edge drain

Gas venting

ESD II with 6.0oz Nonwoven Geotextile Fabric is a dual sided strip drain. ESD II is used for for trench drains, interceptor drains, highway edge drains and gas venting. The two-sided geocomposite allows multi-directional flow for continuous water discharge. It is lightweight, easy to install and has drainage flow capacities 3-5x that of traditional aggregate systems. ESD II is made up of a heavy duty dimpled polypropylene drainage core that is wrapped and bonded to a 6.0oz nonwoven geotextile fabric. The fabric retains sand, soil and concrete and allows filtered water to passs through the nonwoven fabric.

Size
12″ x 165′

ESD II Specification

SWD Strip Drain

High profile drainage composite

Features

Effectively removes standing water

Slim profile allows for narrow trench

Cost effective drainage solution for fields

Eliminates cross field trenching – reducing time and labor costs

Made in the USA

Applications

Highway edge drain

Synthetic turf fields

Playgrounds

Golf courses

Athletic fields

Farms

Gardens and lawns

SWD consists of a heavy duty polypropylene dimpled drainage core. The core is then wrapped and bonded with a non-woven filter fabric. SWD is an edge drain product that channels water away from highway shoulders in order to prevent over saturation of the subgrade. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Soil backfill is retained while allowing water to pass into the drainage system providing hydrostatic relief. Collected water is then conveyed to a collection system.

Product	Size
SWD-6	6″ x 165′
SWD-12	12″ x 165′

SWD Specification

SWD for Highway Edge Drain Brochure

SWD for Wall Systems Brochure

SWD for Field, Farm and Landscape Drainage

SWD Fittings

Fittings connect SWD drainage composite

Available in 6-inch and 12-inch

Fitting	Description	Item #
6″ End Out	Connect SWD to 4 inch corrugated pipe	JDRFIT89C
12″ End Out		JDRFIT89C
6″ Side Out	Make in line transition from SWD to intermediate collection of water along footing	JDRFIT93C
12″ Side Out		JDRFIT91C
6″ Splice	Connects two strips of SWD vertically or horizontally	JDRFIT95C
12″ Splice		JDRFIT94C
6″ T-Connector	Connects three strips of SWD, typically in landscape applications.	JDRFIT98C
6″ End Cap	Covers the cut end of SWD at vertical or horizontal terminations	JDRFIT86C

all fittings are sold by the pack. 10 units per pack

What is a drainage composite?

A drainage composite is an all-in-one system that combines a dimple core and a nonwoven geotextile fabric.

The three-dimensional core is manufactured from a polypropylene sheet that is cuspated under heat and pressure. The resulting dimple core is bonded to a nonwoven filter fabric. The resulting composite product allows for directional flow while retaining soil and backfill.

Explore Related Solutions

Channel Drain installed in pavers — Drainage Solutions

Nonwoven geotextile fabric — Nonwoven Geotextiles

Need a price?

Contact our sales team to get started.

Call Us